Gorra bike!

Our transport is heavily oil-based. What are the alternatives?

Moderator: Peak Moderation

Post Reply
Vortex
Posts: 6095
Joined: 16 May 2006, 19:14

Gorra bike!

Post by Vortex »

I have at last bought a bike!

It's a folding model, so I can fit it in the boot of my A4.

I had forgotten how much fun cycling was .. or how scary trucks are!

It's only 5 minutes by bike to my office ... almost the same as getting the car out and then parking it at the other end. For some mad reason I had though it would be 10 minutes or more ...

Maybe I'll get fit this Summer too!
creeping elm
Posts: 6
Joined: 09 Jul 2007, 21:19

Post by creeping elm »

Hi, I got myself one of these about a year ago, you buy various bits for about ?400 which installs a frame onto the rear of eg an old steel-framed mountain bike, moves the back wheel back a foot and will carry up to 90kg in weight. It has 2 versatile side pockets which will take a bag of sand each and you can get extension racks for wide loads, also with a stand-off bar for carrying eg long lumber which is thus kept away from the pedals. I carried 3 bags of sand on it back from B&Q last w/e, though you wouldn't get a weight like that up any hills.

I often think about cycling and peak oil, and I intend to stock up on parts while they're still quite cheap. The problem could be tyres and tubes as they are perishable, but as far as other components go:

bottom bracket, about ?15, last 3-5 years of fairly heavy use.
wheels, about 10 years, ?60+ per set
chain and rear block - 1.5 years, ?30
chainrings, front and rear derailleurs - 5 years+ though can fail unexpectedly - ?75+
pedals - as long as the cranks - ?20
tyres/tubes - 1 year depending on luck, ?20+ per set
headset - at least 10 years, ?10+ ?

Tools:
allen keys and screwdrivers
spanners inc large adustable for headset or 2x headset spanners, pedal spanner (15mm)
track pump (floor-mounted)
bottom bracket and crank extractors
13mm socket for crank bolts essential, pref a whole set

So it wouldn't cost the earth to get replacement stuff stockpiled, it won't be any cheaper than now. Cheap MTBs are ubiquitous but most of the components on them are reasonably good and cheap, ie not frame and wheels. And steel is far preferable to aluminium for durability.

Also, it's great whizzing along roads on fast bikes with thin tyres but in the future the state of the roads would deteriorate if there weren't cars sending any debris out into the verges, so the MTB type with chunky tyres would be the best option, while enjoying the others as long as possible - I ride recumbents, and have a folder too.
User avatar
Billhook
Posts: 820
Joined: 24 Nov 2005, 11:09
Location: High in the Cambrian Mountains

Post by Billhook »

Creeping elm -

welcome to the forum !

Especially with so practical a first post.


One point worth posting, on the offchance that you've not come across it,

is that rubber can be protected from perishing for many years

by coating it with vaseline (every couple of years)

and keeping it in the dark - maybe wrapped in bin bags ?

Hope this helps.

Regards,

Bill
User avatar
Andy Hunt
Posts: 6760
Joined: 24 Nov 2005, 11:09
Location: Bury, Lancashire, UK

Post by Andy Hunt »

Going to get my mountainbike serviced when I have a few ?s spare, that's one of the tasks on my PO preps list.

A puncture repair kit might be a better investment than keeping inner tubes and coating them with vaseline. The latter could be a good option if you have somewhere to store them, but in a small house like mine it sounds a bit messy.
Andy Hunt
http://greencottage.burysolarclub.net
Eternal Sunshine wrote: I wouldn't want to worry you with the truth. :roll:
User avatar
mikepepler
Site Admin
Posts: 3096
Joined: 24 Nov 2005, 11:09
Location: Rye, UK
Contact:

Post by mikepepler »

Andy Hunt wrote:Going to get my mountainbike serviced...
Don't pay someone to do it. Spend the money on any tools you need and get a knowledgeable friend to show how how to check/adjust gears, brakes and bearings and do any required lubrication. It's pretty simple. (apologies if this was what you were intending to do anyway!)

On the subject of punctures, has anyone tried latex inner tubes, or puncture resistant tyres?
User avatar
Adam1
Posts: 2707
Joined: 01 Sep 2006, 13:49

Post by Adam1 »

mikepepler wrote:On the subject of punctures, has anyone tried latex inner tubes, or puncture resistant tyres?
Kevlar tyres are your friends. I had my first puncture in 10 years a few months ago. I was a regular cyclist (30 - 35 miles a week on average) until a few months ago. Before Kevlar, I had punctures quite frequently.
Last edited by Adam1 on 30 Aug 2007, 15:37, edited 1 time in total.
User avatar
Andy Hunt
Posts: 6760
Joined: 24 Nov 2005, 11:09
Location: Bury, Lancashire, UK

Post by Andy Hunt »

mikepepler wrote:
Andy Hunt wrote:Going to get my mountainbike serviced...
Don't pay someone to do it. Spend the money on any tools you need and get a knowledgeable friend to show how how to check/adjust gears, brakes and bearings and do any required lubrication. It's pretty simple. (apologies if this was what you were intending to do anyway!)
I wasn't actually, thanks for the good advice Mike. My dad used to be a keen cyclist, I will ask him how to do it and he can show me.

Sometimes the best solutions are the most obvious ones, eh.

:wink:
Andy Hunt
http://greencottage.burysolarclub.net
Eternal Sunshine wrote: I wouldn't want to worry you with the truth. :roll:
MacG
Posts: 2863
Joined: 24 Nov 2005, 11:09
Location: Scandinavia

Post by MacG »

Billhook wrote: One point worth posting, on the offchance that you've not come across it, is that rubber can be protected from perishing for many years by coating it with vaseline (every couple of years)
Uhu? Stock up on rubber and Vaseline? This is turning a bit more nasty than I expected...
sentiententity
Posts: 91
Joined: 01 Aug 2007, 17:08
Location: Edinburgh
Contact:

Gorra Bike

Post by sentiententity »

On the subject of punctures, has anyone tried latex inner tubes, or puncture resistant tyres?
Latex tubes have bigger pores in them than butyl ones, so they go down very quickly-you have to pump them up before every ride. Their only advantage is that they are lighter, which is really only important if you race.

If you pump your tyres up hard and use decent slick tyres (don't need to worry about tread on a bike if you ride mainly on the road), you shouldn't be too much plagued by punctures.

s.
creeping elm
Posts: 6
Joined: 09 Jul 2007, 21:19

Post by creeping elm »

Thanks Bill, and for the tip on coating with vaseline. In fact I was asking this exact same question on another forum and nobody came up with this suggestion, 10 years was cited as being the maximum shelf life, with inner tubes a lot less.

I don't think there's any good solution to avoiding punctures, except what sentient says. In fact cyclists tend to avoid using the dread word as it may invoke a visit from the "fairy" that doles out unwonted deflations on the least deserving victim.

Is it Kevlar, Adam, I used to get a puncture every 2 weeks or so 15 years ago, but now they are rare occurrences, touchwood, even when I commuted into the centre of Brum.

Bikes aren't hard to maintain, once you know the ins and outs of your particular model it doesn' t take much to make routine adjustments and clean the drive train, I was reading how a local cycling facilitator paid a local bike shop to replace all his cables, it's dead easy, and changes need to be 'monitored' as they bed in so better to do it yourself.
Post Reply