LED Lightbulbs

For technical discussions about electricity, electrical equipment with particular emphasis on safe and compliant installations.
Off topic remarks are liable to be moved elsewhere, or in extreme cases to be deleted.
User avatar
clv101
Site Admin
Posts: 10551
Joined: 24 Nov 2005, 11:09
Contact:

Post by clv101 »

If both the lamp and the computer are CE marked then there shouldn't be any electromagnetic incompatibility issues. Both the lamp won't emit anything other devices can't tolerate and the laptop won't be susceptible to anything it's likely to receive from other devices.
Kieran
Posts: 1091
Joined: 25 Jul 2006, 19:40
Location: West Yorkshire

Post by Kieran »

adam2 wrote:Have you repeated the experiment to see if the intference was real, or a coincidence ?
I've just tried it a couple of times and it's booted normally. It must have been a coincidence. A quick google came up with this
http://www.lowemfoffice.com/led_light_bulbs_emf.htm
which was a bit worrisome so I thought I'd check here.

Both the netbook and the bulb are CE marked.
cubes
Posts: 725
Joined: 10 Jun 2008, 21:40
Location: Norfolk

Post by cubes »

Kieran wrote:Was this just a coincidence or do these bulbs emit enough EM radiation to interfere with electronic devices?
If it hadn't of emitted any EM radiation I'm sure you'd have sent it back! :)
Kieran
Posts: 1091
Joined: 25 Jul 2006, 19:40
Location: West Yorkshire

Post by Kieran »

:lol:

Should have mentioned my google search came up with the welcome news that led bulbs won't interfere with orgone accumulators. Now that would have been a real bummer.

:P
User avatar
JohnB
Posts: 6456
Joined: 22 May 2006, 17:42
Location: Beautiful sunny West Wales!

Post by JohnB »

The 12v LEDs in my van cause FM radio interference, but I haven't investigated the cause. It has a wire aerial about a foot from two of the lights.
John

Eco-Hamlets UK - Small sustainable neighbourhoods
revdode
Posts: 317
Joined: 24 Nov 2005, 11:09
Location: Hungary
Contact:

Post by revdode »

The most likely problem would be disturbance on the mains rather than emitted radiation so from a personal perspective no issue. It may not be continuous though possibly just related to supply stability.

Adam is (as normal) correct if both carry the CE mark there should be no issue on mains or RFI BUT I've seen on some low cost LED drivers we examined definite evidence that especially when turned on they create mains noise.

In some case we find some of the lower cost luminaires on the market are provided with drivers (power supplies) with insufficient protection from normal noise levels (small transients make them unstable) in others the driver creates problems or generates a supply which is really not suitable for use with an LED light source. In one case part rectified with no smoothing, not a great light source to try to read with.

For information in the mainstream profession luminaires market we are now at over 4000 lumen nominal on system (product) level. Above 5000 lumen at source level. From someone who was slightly skeptical about LED a few years ago I find myself working in a factory where it has become more than 50% of our business in one year. This year we shipped something around 200k pieces of LED luminaires, the largest part of which went into supermarkets for shop lighting.
Kieran
Posts: 1091
Joined: 25 Jul 2006, 19:40
Location: West Yorkshire

Post by Kieran »

revdode wrote:The most likely problem would be disturbance on the mains rather than emitted radiation so from a personal perspective no issue. It may not be continuous though possibly just related to supply stability.

Adam is (as normal) correct if both carry the CE mark there should be no issue on mains or RFI BUT I've seen on some low cost LED drivers we examined definite evidence that especially when turned on they create mains noise.
I seem to get a lot of mains noise switching on lights and other things, makes the radio splutter. The bulb had already been on for a few minutes before the netbook failed to boot, presumably any noise would have died down by then?
Tried using a battery powered radio around the lamp and there was no interference at all so that's OK.
User avatar
Mark
Posts: 2522
Joined: 13 Dec 2007, 08:48
Location: NW England

Post by Mark »

Envirolink NW have produced a guide to LED Lighting:
http://www.envirolinknorthwest.co.uk/En ... ghting.pdf
User avatar
lancasterlad
Posts: 359
Joined: 22 Jun 2007, 06:29
Location: North Lancashire

Post by lancasterlad »

I've just fitted some 5w GU10 style LED's to replace 50w halogen GU10's. They're absolutely incredible. I got the warm white and am very pleased with the result. They're almost as bright as the 50w lamps they replace.
Lancaster Lad

Who turned the lights off?
CountingDown
Posts: 447
Joined: 23 Aug 2008, 21:49
Location: Adrift in the UK

Post by CountingDown »

lancasterlad wrote:I've just fitted some 5w GU10 style LED's to replace 50w halogen GU10's. They're absolutely incredible. I got the warm white and am very pleased with the result. They're almost as bright as the 50w lamps they replace.
Sounds great - what brand / where did you get them?
Post Reply