Page 1 of 1
Prerequisites for the new Embedded Generation Grants Scheme
Posted: 01 May 2006, 15:23
by Bandidoz
[edit] Off the top of my head...
1) You must have at least 10" of loft insulation
2) If you have cavity walls, they must be filled with insulation
3) Low energy lights (CFLs) must be fitted throughout
4) The heating system must have (digital) controls.
Re: Prerequisites for the new Embedded Generation Grants Sch
Posted: 02 May 2006, 16:03
by oobers
Bandidoz wrote:1) You must have at least 10" of loft insulation
2) If you have cavity walls, they must be filled with insulation
3) Low energy lights (CFLs) must be fitted throughout
4) The heating system must have (digital) controls.
The text on
www.lowcarbonbuildings.org says
a. You have minimum loft insulation to meet current building regulations, where practicable - e.g. 270mm of mineral wool.
b. Installed cavity wall insulation (if you have cavity walls).
c. Using low energy light bulbs in all appropriate light fittings.
d. Installed basic controls for your heating system to include a room thermostat and a programmer or timer.
so not that onerous, really.
It is one of the better aspects of the programme, I reckon. In the old PV grant and clear skies schemes I seem to remember you only had to fill in a DIY home energy survey and you were not obliged to carry out any of the recommendations - meaning that you could get a generous grant on a wood heat system in a house that leaked heat like a sieve or fit a a PV system in a building lit up like a Christmas tree with tungsten lamps. Silly.