Another solar power breakthrough?

Is Solar Power going to give the UK the energy it needs for the 21st century?

Moderator: Peak Moderation

Post Reply
snow hope
Posts: 4101
Joined: 24 Nov 2005, 11:09
Location: outside Belfast, N Ireland

Another solar power breakthrough?

Post by snow hope »

"In a scientific breakthrough that has stunned the world, a team of South African scientists has developed a revolutionary new, highly efficient solar power technology that will enable homes to obtain all their electricity from the sun."

http://www.int.iol.co.za/index.php?set_ ... 138C184427

Any knowledgeable comments?
Real money is gold and silver
DaBeeeenster
Posts: 58
Joined: 23 Mar 2006, 22:23
Location: London
Contact:

Post by DaBeeeenster »

There is some more information here:

http://peswiki.com/index.php/Directory: ... film_solar
snow hope
Posts: 4101
Joined: 24 Nov 2005, 11:09
Location: outside Belfast, N Ireland

Post by snow hope »

Thanks Da

How much of an advance over normal PV is this?
Real money is gold and silver
User avatar
mikepepler
Site Admin
Posts: 3096
Joined: 24 Nov 2005, 11:09
Location: Rye, UK
Contact:

Post by mikepepler »

The advance is in cheap manufacturing, if it's genuine. They sound like they are lower efficiency, as you wouldn't normally need 30 square metres to power a home, more like 10, but if they're cheap to make (in energy as well as money) then that may be OK.
User avatar
clv101
Site Admin
Posts: 10551
Joined: 24 Nov 2005, 11:09
Contact:

Post by clv101 »

Three different kinds of efficient when considering solar panels.
  • Power per square meter (the commonly quoted 5-15% efficiency)
  • Power per $ spent on the panel (a ?500 panel might have a peak power of 100W)
  • Embodied energy in the design, manufacture, install, maintenance, decommission compared to how much energy the panel generates over it?s life (a 100W panel might generate 4MW over its 30 year life in southern Europe compared to an embodied energy of say 0.4MW)
It seems to me that most of the effort to date has been on improving the first kind of efficiency. I suspect there are significant gains to be had lowering the cost per W and lowing the manufacturing energy at expense of area efficiency. Often area is not the limiting factor ? cost is.
Post Reply